Epoxy Flooring Burlington, NC
Garage and shop floors for Alamance County, moisture-tested before we coat.
Epoxy Flooring Built for Burlington's Garages, Homes & Shops
Ascent Epoxy Greensboro installs epoxy and polyaspartic floors in Burlington, NC, for older homes and for the shops along I-40 and I-85. Burlington is the biggest city on the Alamance County side of our service area, about 22 miles east of downtown Greensboro — about 32 minutes in free-flowing traffic and 35 to 40 at rush hour, depending on which side of town you're on. That puts it on the eastern side of where we work, and we'd rather say so plainly than pretend we're around the corner.
Most housing here is single-family and owner-occupied, and the large majority of it was built well before 2010, so the typical Burlington garage slab has carried cars for decades: stained by tires and oil, pitted where the surface has worn, often with a hairline crack or two.
Like most of the Triad, Burlington's older homes sit on crawlspaces, which makes the garage the one big slab-on-grade surface on the property — and the one that takes the beating. A Piedmont year works it from both sides.
From late May into late September the air is muggy enough that slab temperature and dew point decide whether a coating can go down at all, and in winter the brine NCDOT lays down before an ice storm rides into the garage on your tires and slowly scales bare concrete. That is why every garage and commercial job starts with a diamond grind, crack and spall repair, and a free moisture test — not a guess — before a UV-stable polyaspartic topcoat seals the finish.
Whether it's a flake floor on a garage in one of Burlington's older neighborhoods or a solid-color floor in a shop or flex suite off the interstate, the hours of grinding, repair, and moisture testing before the first coat are what separate a floor that peels in two years from one that lasts for decades — and every garage floor comes with a written 25-year transferable warranty you can read before you sign, while shop and flex-suite floors get the warranty for their system in writing. What sets the price is in the FAQ below; the full range of systems is on the Ascent Epoxy Greensboro home page.
Get a Free Burlington QuoteServing Burlington ZIP codes 27215 and 27217.
Every project starts with a free on-site assessment and a slab moisture reading before we put a number on paper.
Why Ascent Epoxy Greensboro for Your Burlington Floor
Moisture-tested prep, free on-site estimates, humidity-timed installs, and a crew lead you can name.
Free
On-Site Burlington Assessment
Burlington is about 32 minutes from downtown Greensboro, and the visit is still free: we measure the slab, take a moisture reading, talk finishes and leave a written line-item quote.
Polyaspartic
Garage & Light-Commercial Systems
Flake, solid-color, and polyaspartic floors built for daily garage use and for the foot and cart traffic of the shops, gyms, and flex suites along Burlington's I-40/I-85 corridor.
Tested
Moisture-First Prep
A free moisture test on every slab. Coating over untested moisture is one of the most common reasons a garage floor peels, so we test first and add a moisture-mitigation primer only when the readings call for it.
Free
Free On-Site Estimates
Every estimate is free and on site: we measure the space, check the slab and show you samples, and you get a written quote before any deposit, residential or commercial.
Read first
25-Year Transferable Home & Garage Warranty
For a garage or home floor, delamination, peeling, cracking, and adhesion are covered in a document you can read before you sign. We hand it to you at the estimate visit and explain what voids it and how a claim works; shop floors get their system's terms in writing.
Named
A Crew Lead You Can Name
Blake leads the crew that will be on your Burlington floor, so you know the name of your crew lead before the estimate visit, and every call or form gets a callback the same business day.
Burlington Epoxy Flooring FAQ
Straight answers on distance, crawlspace homes, cost, and winter brine.
Yes. Ascent Epoxy Greensboro installs epoxy garage floors in Burlington, NC. Burlington is on the eastern side of our service area — about 22 miles east of downtown Greensboro, about 32 minutes in free-flowing traffic and 35 to 40 at rush hour — and we schedule it like any other Triad job. Most Burlington homes were built well before 2010, so the typical garage job here is resurfacing a stained, pitted slab, not protecting a new one. Every job starts with a free on-site visit and a moisture reading before we put a number in writing, and the full moisture test runs before any coating goes down.
Yes. Even when the house itself sits over a crawlspace, as most older Triad homes do, the garage floor is a concrete slab poured on grade, which is exactly what epoxy and polyaspartic coatings are made for. We diamond-grind the slab, repair cracks and spalls, and test moisture before any coating goes down; if readings run high we add a moisture-mitigation primer before the base coat.
Every garage in Burlington is priced after a free on-site measurement, because the price depends on the size of the space, the condition of the slab (cracks, old coatings, moisture), the system and finish you choose, and the prep the concrete needs. Call (336) 358-6309 or request a free estimate for an exact written, line-item price, with no obligation. See the Greensboro garage floor cost guide for how slab age, grinding and crack repair affect the price.
Not a properly coated one. Bare concrete is what suffers: the brine NCDOT sprays before a winter storm and the rock salt spread after it ride into the garage on your tires, and repeated freezing and thawing with salt on the surface is a known cause of scaling — the flaking you see on older Triad slabs. A UV-stable polyaspartic topcoat stands up to salt and de-icers and rinses clean. In summer we time the install around slab temperature and dew point, usually with a morning start.
Newly Serving the Triad, With the Process in Writing
Our crew leads every job and has done this work in ten other markets before Greensboro.
Meet Your Crew Lead
Blake leads the crew from the first slab test to the final walkthrough. Most two-car garages are one day on site, and you get the walk-on and drive-on times for your system in writing before we start.